Avanti Plus® Series

Using fuzzy logic algorithms, the unit determines the operating mode and temperature settings automatically and adjusts the inverter frequency.

Infrared motion detector that monitors activity within the room and saves energy by adjusting temperature accordingly.

Automatically adjusts the set temperature and turns the unit off based on activity detected by the motion sensor.

Automatically selects the required heating or cooling function based on the current room conditions and set temperature.

Reduces humidity by removing moisture from the air without affecting indoor temperature.

Provides 15mins of boosted power to quickly heat or cool your home before returning to normal operation. Perfect for when you first turn on it the unit.

Set periods of time where the unit will operate with reduced noise levels, perfect for night time and an uninterrupted sleep.

Designed for the colder seasons, this function ensures the room temperature is kept at around 10˚C, even while unoccupied.

Set your unit to turn on and off at specific times for each day of the week to suit your needs.

Set a pre-determined amount of time between 30 and 240 mins that your unit will operate for before switching off.

Set your unit to turn on and off once, at specific times, within a 24 hour period.

The desired preset operation mode can be enabled with a single touch of a button.

Lock the remote control to prevent little ones from changing functions and other settings. Useful for families with curious young children.

Adjust the brightness of the LED display on the indoor unit to minimise disturbance during evenings. Perfect for units installed in bedrooms.

Advanced fan blade technology, used in the development of jet engines, efficiently delivers powerful yet quiet and evenly distributed airflow.

The vertical louvres on your unit will move up and down continuously during operation. This function allows you to set the up/down swing position of the louver to your preferred operation angle.

One touch program that operates three independent motors which effectively distributes an even airflow across the entire room.

Depending on whether the unit is in heating or cooling mode this will automatically set the louvre at the optimum angle for even air distribution.

Set the louvre at the desired angle. Unit will automatically return the louvres to this position on every subsequent start up.

The horizontal louvres will automatically swing up and down for even air distribution.

The vertical louvres will automatically swing left and right for even air distribution.

Captures airborne allergens such as hair, pollen and dust particles before neutralising them and any bacteria using specially formulated enzymes.

Multi-stage operation that activates enzymes in the specially designed filter, neutralising and suppressing airborne allergens such as pollen, dust and hair.

Dries the indoor unit and filter, preventing the growth of mould. Designed to be run regularly after use.

Easy to clean filter that catches airborne allergens and particles before neutralising odour causing bacteria within them.

If the remote control fails, the unit can be operated via an on/off switch on the indoor unit.

Automatically activated during low ambient temperatures to prevent the frosting of the outdoor heat exchanger.

In the unlikely event of a fault the internal microcomputer automatically runs a diagnostic of the system. This enables a service agent to quickly isolate and repair any issues.

If there is a temporary loss of power, when power is restored, the unit will automatically restart in the same operating mode it was in.